January 30, 2014 AT 4:02 pm
NEW PRODUCT – 10-pin 2×5 Socket-Socket 1.27mm IDC (SWD) Cable – 150mm long
NEW PRODUCT – 10-pin 2×5 Socket-Socket 1.27mm IDC (SWD) Cable – 150mm long. These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05″) pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now they are in the Adafruit shop!
One cable per order. The ribbon cable is 0.06mm/0.025″ pitch and the connector is a 1.27mm (0.05″) pitch 2×5 box. These are not for use with programming most AVRs or other large devices that have 0.1″ pitch connectors so be aware which you need!
Check out all the Circuit Playground Episodes! Our new kid’s show and subscribe!
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — Shenzhen: The Silicon Valley of Hardware (Full Documentary) and Who invests in hardware?
Wearables — Take flight with shiny wings
Electronics — Inadequate volt signal
Biohacking — The Upside of GMOs (Genetically Modified Organisms)
No Comments
No comments yet.
Sorry, the comment form is closed at this time.