REMINDER – Show and tell is now WEDNESDAY NIGHTS at 7:30pm ET / ASK AN ENGINEER is now WEDNESDAY NIGHTS 8pm ET !

Moving Combo 1240X698
Ladyada has been doing our live electronic show, “ASK AN ENGINEER” for over 4 years, every Saturday night. As far as we know it’s the longest running live electronics show on the net. Later we added SHOW AND TELL and that’s been going on for the last 2+ years on Google+ Hangouts On Air, it’s our favorite 30 minutes of the week when makers around of the world share their projects.

Some folks requested during the week or earlier, there’s never a perfect time and date for everyone, but it’s all recorded now. That said, we’re moving both shows to Wednesday, it will be joining “Wearable Electronics with Becky Stern” also on Wednesday. Why are we moving the show(s) to Wednesday nights? Having the shows mid-week and earlier in the night will allow us to have more guests from the world of making and have more of our own Adafruit staff on the show. It also means Ladyada can work on electronics all weekend and maybe, possibly, take a day off once and awhile too πŸ™‚

The new times are:

Moving Showtell 1240X698
SHOW AND TELL – Wednesday nights, 7:30pm ET on Google+ Hangouts OnAir (playlist here).


Moving Askengineer 1240X698
ASK AN ENGINEER – Wednesday nights, 8pm ET on YouTube LIVE and Ustream (playlist here).


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 11/8/2024 Featuring Adafruit Pixel Shifter – For Addressable LEDs! (Video)

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: MicroPython v1.24.0 is here, a Halloween Wrap-up and Much More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — Halloween, WiLo, and more!

Maker Business – Adafruit Daily — First Solar’s $1.1 billion development of vertically integrated factory in the U.S.

Electronics – Adafruit Daily — Oscilloscope Jumble

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.