Glowing Oogie Boogie Costume

oogie boogie

Oogie Boogie is one of the scariest Disney villains as far as I’m concerned. He’s cruel and manipulative, but he does have a cool costume. Instructables user kristylynn84 fashioned the entire costume from burlap and because the costume is loose and lumpy, it meant she could take some liberties (she didn’t use a pattern). She took the extra awesome step of making Oogie glow in the dark. Here’s how she achieved that with glowing spray paint:

We used about 6 cans. You may want to buy 7 or 8, just to be safe, and return the last one if you don’t use it. But remember, the suit will need numerous coats, and so will the mask.

I took him outside and made him do some slow spins as I painted him up. It’s transparent, so you can’t see what you’ve done until you hold a black light to it, once it’s dried it will activate. Yes, the paint went through and I ended up painting my husband LOL, it made a cool effect. (The can says to not get it on your skin. But he lived.)

I would say….10-12 coats of spray paint and between those, you need to go over it with a hand-held black light to see where you’ve missed any spots.

Read more at Instructables.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Philips, an electronics giant, has faded from its former glory

Wearables — Capture sounds

Electronics — Audio amplifier advice

Python for Microcontrollers — Python on Microcontrollers Newsletter: MicroPython Pico W Bluetooth, CircuitPython 8.0.4 and much more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Boxing Glove Tracker, Disconnecting Smart Appliances, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProducts 3/15/23 Feat. Adafruit CAN Bus FeatherWing – MCP2515!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.