Ben tries out the Beagle Bone Black and shows you what he learns along the way. He shows how to get it set up, three ways to connect to it, and tries out a cool LCD cape. By the time he’s done experimenting, he’s got an idea for how he’ll use the Beagle Bone Black in a future project.
Ben takes his use of 3D printers to the next level and tries 3D scanning. He attempts to scan a variety of objects with the Cubify Sense 3D scanner to discover how to get the most out of the device and to create the best prints possible. Ben shows you how to build a rotational device for the scanner and shares what he learns about 3D scanning along the way.
Each Tuesday is BeagleBone Black Day here Adafruit! What is the BeagleBone? The BeagleBones are a line of affordable single-board Linux computers (SBCs) created by Texas Instruments. New to the Bone? Grab one of our Adafruit BeagleBone Black Starter Packs and check out our extensive resources available on the Adafruit Learning System including a guide to setting up the Adafruit BeagleBone IO Python Library. We have a number of Bone accessories including add-on shields (called “capes”) and USB devices to help you do even more with your SBC. Need a nice display to go along with your Bone? Check out our fine selection of HDMI displays, we’ve tested all of them with the Beagle Bone Black!
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — Lessons Learned Scaling Airbnb 100X
Wearables — Start with a sketch
Electronics — When do I use X10?
Biohacking — Project Peri – Translates Sound into Light for the Hearing Impaired
No comments yet.
Sorry, the comment form is closed at this time.