Shell Shorts: A concise history of the Eames Shell Chair and how they are made today #ArtTuesday #manufacturing

NewImage

Herman Miller has a great write up on the history of the iconic Eames Shell Chair as well as some fun animated gifs on how they are made today. Check out the full story here.

Below is some history of the chair written by Amber Bravo.

The story of the Eames Plastic Shell Chair really began more than ten years prior to Charles and Ray’s 1950 debut of their now iconic design for Herman Miller. Understanding this decade-long evolution not only helps shed light on Charles’ oft-quoted—“The details are not the details. They make the design”—it says a lot about the responsibility Herman Miller and the Eames Office and family have assumed at Charles and Ray’s request, to stay true to the designers’ tireless drive to improve and refine their designs.

The Eameses were notoriously material agnostic, and the seeds of the plastic shell we know and love today were really planted in the late ’30s, when Charles and Eero Saarinen first began exploring plywood seating in curved forms at Cranbrook Academy of Art, where Charles served as the head of the design department. Saarinen’s father, Eliel, was the head of Cranbrook and Eero was a junior partner at his father’s architecture office. It is likely that both Eames and Eero were influenced by the work of Finnish architect Alvar Aalto, who’d lectured at Cranbrook in the early ’30s and was well known for his bent plywood furniture. Eames and Saarinen’s first attempt at shaping plywood was realized in a chair concept for Eliel’s design for the Kleinhans Music Hall in Buffalo, NY, in 1939. While that chair had two-dimensional curves, their next design, an entry for The Museum of Modern Art’s “Organic Design” competition in 1940 had three-dimensional curves. For this they won first prize, but it was only produced in very limited numbers and not anywhere near to their desired quality. By this time, Charles had met and married Ray Kaiser, a student at Cranbrook, and the two moved to Venice, California to open their eponymous office. Eero abandoned the project, but Charles and Ray were determined to figure out a completely new process for molding plywood into compound curves.

Charles and Ray continued to experiment with their new technique for molding plywood, and their efforts yielded stretchers, lightweight, stackable leg splints (1942), and a glider seat (1943) for the U.S. Navy. When the war ended, they returned to the concept of a mass-produced chair. Despite their best efforts, they were still unable to produce a single-shell plywood form, but instead landed on a compelling alternative: a chair comprised of separate molded plywood panels for the back and seat, which would become the Eames Molded Plywood Chair (1946), which is still in production today and was subsequently named “Best Design of the Century” by Time magazine. Two years later, they produced a single form shell chair made out of stamped metal for Museum of Modern Art’s “International Competition for Low-Cost Furniture Design.” It took second place in the competition, but the, neoprene-coated prototype was too costly to produce, so Charles and Ray began looking into new materials like plastic reinforced with fiberglass, a material that could be molded into organic shapes and produced cost effectively, but had not yet been used in a consumer application before.

It was this iteration—released in 1950—that went on to become the first mass-produced plastic chair, but it was not the end of the design’s evolution. Through the years, color and height options, shock mounts, base variations, and choices of upholstery have redoubled, making the chair not only easily reproducible but also highly customizable. Manufacturing processes have also been closely monitored and modified, and, in the late 1980s, almost a decade after Charles’ death in 1978, the environmental implications of fiberglass production were called into question by Ray and Herman Miller. In the early 1990s, Herman Miller ceased production. After years exploring more sustainable solutions, the company reintroduced the Molded Plastic Shell Chair in 100% recyclable polypropylene in 2004, based on prototypes in the Eames Office archives, which Charles and Ray had made with fiberglass-free plastic in the 1970. In 2013, again working with the Eames Family, Herman Miller realized Charles and Ray’s vision for the shell chair design in a new and quite appropriate material—molded wood, thanks to advancements in the 3D veneer technology, and this year, the company has reintroduced the Shell Chair in a sustainably reformulated, Greenguard Gold Certified molded fiberglass as well as in upholstery.

Taking off where the Eames left off with their 1970 film, “The Fiberglass Chairs: Something of How They Get the Way They Are” WHY revisits the fiberglass production process in our fiberglass manufacturing facility in Ashtabula, OH and in Herman Miller’s own Greenhouse facilities in Zeeland, MI, in ten bite-sized videos, which we’ll be releasing over the course of two days on Instagram (along with some corresponding gif trailers below) and exploring the ways in which Herman Miller is honoring the Eames original design and ethos by pushing the manufacturing process and quality to be the best and most sustainable it can possibly be.

Read more.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.