EAGLE Version 7 free upgrade – BUY NOW UPGRADE FOR FREE LATER

Adafruit Cadsoft Eagle Hero
Hey folks! Great news, if you’ve purchased EAGLE Version 6 after April 15th, 2014 from Adafruit you’ll get an EAGLE Version 7 free upgrade when it’s released (likely July-ish). Once Version 7 has been released, you will automatically be informed about its availability when you start EAGLE. Details from CadSoft below!

Terms and conditions International
If you buy an EAGLE Version 6 or upgrade from a former version to version 6 within the period between the 15th of April 2014 and the release date of EAGLE Version 7, we will give you a free of charge upgrade to EAGLE Version 7, subject to the following conditions:

  1. You have purchased a new EAGLE Version 6 license or have upgraded from a former EAGLE version to EAGLE Version 6.
  2. This purchase or upgrade was made within the period from 15th April 2014 to the launch date of EAGLE Version 7.
  3. Please note that any upgrade to Version 7 will require your acknowledgement and acceptance of the V7 License Agreement. Also, you will be required to indicate your HostID as described in the V7 License Agreement. Once Version 7 has been released, you will automatically be informed about its availability the next time you start EAGLE. You can then request the free upgrade through the CadSoft webshop and will be required to specify your HostID and to accept the License Agreement of V7.
  4. CadSoft reserves the right to determine the release date in its sole discretion. A concrete release date has not been determined yet. You agree that there is no entitlement to receive the update at a certain date.
  5. We hereby inform you, that the upgrade to Version 7 is limited to the purchased modules and edition you have upgraded/ updated or added within the defined period.
  6. You are not permitted to participate in the campaign if by doing so you may cause yourself to be in breach of any agreement (including but not limited to any contract of employment) to which you are party or in breach of any law, regulation or rule.
  7. CadSoft Computer GmbH reserves the right to modify these terms at any time – with or without prior notification. Please inform yourself with regard to the current version by visiting this site.
  8. You agree to give us evidence that you have legally purchased the Version 6 or the upgrade to Version 6. Fraud or misconduct excludes you from the participation in this campaign.
  9. Please read our Privacy Policy which tells you how we use any personal information we may collect about you by participating in this campaign.
  10. Any dispute or claim arising out of or in connection with this campaign shall be governed by and construed in accordance with German law. The German courts shall have exclusive jurisdiction. The application of the United Nations convention on the sale of goods (Vienna Convention) is hereby excluded.
  11. This campaign is being run by CadSoft Computer GmbH, Pleidolfweg 15, 84568 Pleiskirchen.

Terms and Conditions Europe & Distributors
If you buy an EAGLE Version 6 within the period between the 15th of April 2014 and the release date of EAGLE Version 7, we will give you a free of charge upgrade to EAGLE Version 7, subject to the following conditions:

  1. You have purchased an EAGLE Version 6 license.
  2. This purchase was made within the period from 15th April 2014 to the launch date of EAGLE Version 7.
  3. Please note that any upgrade to Version 7 will require your acknowledgement and acceptance of the V7 License Agreement. Also, you will be required to indicate your HostID as described in the V7 License Agreement. Once rsion 7 has been released, you will automatically be informed about its availability the next time you start EAGLE. You can then request the free upgrade through the CadSoft webshop and will be required to specify your HostID and to accept the License Agreement of V7.
  4. CadSoft reserves the right to determine the release date in its sole discretion. A concrete release date has not been determined yet. You agree that there is no entitlement to receive the update at a certain date.
  5. We hereby inform you, that the upgrade to Version 7 is limited to the purchased modules and edition within the defined period.
  6. You are not permitted to participate in the campaign if by doing so you may cause yourself to be in breach of any agreement (including but not limited to any contract of employment) to which you are party or in breach of any law, regulation or rule.
  7. CadSoft Computer GmbH reserves the right to modify these terms at any time – with or without prior notification. Please inform yourself with regard to the current version by visiting this site.
  8. You agree to give us evidence that you have legally purchased the Version 6. Fraud or misconduct excludes you from the participation in this campaign.
  9. Please read our Privacy Policy which tells you how we use any personal information we may collect about you by participating in this campaign.
  10. Any dispute or claim arising out of or in connection with this campaign shall be governed by and construed in accordance with German law. The German courts shall have exclusive jurisdiction. The application of the United Nations convention on the sale of goods (Vienna Convention) is hereby excluded.
  11. This campaign is being run by CadSoft Computer GmbH, Pleidolfweg 15, 84568 Pleiskirchen.


Halloween season is here!
Halloween season is here! Check out all the posts, gift guides, and more!

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 10/4/2024 Featuring Adafruit RP2350 22-pin FPC HSTX to DVI Adapter for HDMI Displays! (Video)

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: Adafruit Grand Opening, Profile MicroPython Memory and More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi — Classic editor

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — Garden Lights, Bluetooth 6.0, and more!

Maker Business – Adafruit Daily — A look at Boeing’s supply chain and manufacturing process

Electronics – Adafruit Daily — When do I use X10?

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.