0

Guess the magic number with this Pi-based game #piday #raspberrypi @Raspberry_Pi

Youtube user Hernâni Arsénio made this fun game using his pi.

Used material:

  • 1x Raspberry Pi model B 512mb
  • 1x Breadboard
  • 3x LED (Red, Green, Yellow)
  • 3x 20ohm resistors
  • Jumper wires
  • Female terminal connector for GPIO pins

The following program was made to guess a number between 0 and 999, and if your guess is higher than the defined “magic number” it will blink the Red LED five times, if your guess is lower than the “magic number” it will blink thje green LED five times and if you guess the magic number defined as 321, all the 3 LEDs will blink five times.

Read more


998Each Friday is PiDay here at Adafruit! Be sure to check out our posts, tutorials and new Raspberry Pi related products. Adafruit has the largest and best selection of Raspberry Pi accessories and all the code & tutorials to get you up and running in no time!


Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.

Join 7,500+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython in 2018 – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Despite multiple bankruptcies, RadioShack continues to find ways to keep the lights on

Wearables — Molding with glue

Electronics — A way around surface mount snags

Biohacking — Biohacking : tACS Transcranial Alternating Current Stimulation Demystified

Python for Microcontrollers — Help bring CircuitPython to other languages!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.