Use the MashBerry to Help Monitor Your Home Brewery @Raspberry_Pi #piday #raspberry_pi

Hcam99fjamahy8txiay6

The Mashberry from Sebatian Duell is a pi based controller that helps with your home brewing endeavors, specifically by regulating the mash temperature. Via lifehacker.

MashBerry is a Raspberry PI based beer-brewing controller. It is designed to automate the mashing-process for the homebrewer.

MashBerry can be operated via a Web-interface or via a Display and an IR-remote. The temperature is controlled using a PID-controller, the temperature-measurement is done with a PT1000 or a Dallas 18B20. For power-control an external Solid-State-Relay is used.

The whole configuration (like entering recipes, PID-Autotuning, etc.) is done via the built in Web-interface.

The software is OpenSource and is licensed under the GPLv3.

MashingIn

Read more.


Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Chip inventories rise as demand falls

Wearables — Use this to diffuse LEDs on your wearables

Electronics — Code like everyone’s watching

Python for Microcontrollers — Python on Microcontrollers Newsletter: CircuitPython 8.0.0 Released and much more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Cat Doorbell, Deep Algae Bloom Detector, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — JP’s Product Pick of the Week — 4pm Eastern TODAY! 2/7/23 @adafruit #adafruit #newproductpick

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.