Adafruit will not be shipping orders Thanksgiving Day, Thursday November 22, 2018. Expedited orders placed after 11am ET Wednesday November 21 will go out Friday November 23.
0

Coming Soon – Adafruit Pi T-Cobbler Plus Kit – Breakout for Raspberry Pi B+ / Adafruit Pi Cobbler Plus Kit- Breakout Cable for Raspberry Pi B+

Cobblers

Coming Soon – Adafruit Pi T-Cobbler Plus Kit – Breakout for Raspberry Pi B+ / Adafruit Pi Cobbler Plus Kit- Breakout Cable for Raspberry Pi B+

The Raspberry Pi B+ has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize using all of the Model B+’s 40 pins.

NewImage

That’s why we now carry the Adafruit Pi T-Cobbler Plus – Breakout + Cable for Raspberry Pi B+. This Cobbler is in a fancy T-shape, which is not as compact, but is a little easier to read the labels.

The T-Cobbler Plus is an add on prototyping board from Adafruit specifically designed for the B+ that can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set will make “cobbling together” prototypes with the Pi super easy.

The Pi T-Cobbler Plus kit comes with a 40 pin ribbon cable, a T-cobbler PCB, a 40-pin GPIO socket, and some male header strips.

Once soldered, you can plug the 40-pin GPIO cable between the Pi computer and the T-Cobbler breakout. The T-Cobbler can plug into any solderless breadboard (or even a prototyping board like the PermaProto). The T-Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it.

The T-Cobbler is coming soon! Sign up now.

NewImage

And we carry the Adafruit Pi Cobbler Plus – Breakout and Cable for Raspberry Pi B+. It’s an add on prototyping Pi Cobbler from Adafruit specifically designed for the B+ that you can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set will make “cobbling together” prototypes with the Pi super easy.

This Cobbler is in a compact shape, which is the least bulky way to wire up. Once soldered together, the cable plugs between the Pi B+ computer and the Cobbler breakout. The Cobbler can plug into any solderless breadboard (or even a prototyping board like the PermaProto). The Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it.

Also coming soon! Sign up now.

Both cobblers are designed for use with Raspberry Pi Model B+ only and requires soldering!

And please note: Raspberry Pi B+, solderless breadboard, breadboarding wires, cables, components, power supply, etc are not included! We do stock many of those items in the shop, so check those out as well!


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 8,700+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Bill Gross’s 7 lessons to help you and your business succeed

Wearables — Emphasize the light

Electronics — = != ==.

Biohacking — The Exercise Connection to Ketones and BDNF

Python for Microcontrollers — Python powers costumes, and community @circuitpython @micropython @ThePSF #Python

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.