Device Allows Direct Brain-To-Brain Communication Between Humans

Devise allows direct brain to brain communication between humans. by Lisa Winter via IFLScience

Tapping directly into someone’s brain in order to share thoughts isn’t just for Spock anymore. An international team of researchers were able to replicate the Vulcan Mind Meld by creating a device that allows two people to share information through thought. The researchers tested the technology by separating the users over 8,000 km (5,000 mi) apart—with one user in France and the other in India. The paper has been published in PLOS ONE.

“We wanted to find out if one could communicate directly between two people by reading out the brain activity from one person and injecting brain activity into the second person, and do so across great physical distances by leveraging existing communication pathways,” co-author Alvaro Pascual-Leone said in a press release.

“One such pathway is, of course, the internet, so our question became, ‘Could we develop an experiment that would bypass the talking or typing part of internet and establish direct brain-to-brain communication between subjects located far away from each other in India and France?'”

The device connects directly to the users’ scalps and impulses from the sender were picked up via electroencephalogram (EEG) as well as by image-guided and robot-assisted transcranial magnetic stimulation (TMS). The signal was encoded and sent via the internet to the user on the other end. Once it reached its target destination, the code was then interpreted by a computer interface and delivered to the recipient.

The device worn by the recipient stimulates phosphenes, which appear as flashes of light even though there isn’t actually any light entering the eye. (You can see this phenomenon for yourself by going into a dark room, closing your eyes, and then pushing on your eyeball.) The phosphenes are delivered in a pattern, which needs to be deciphered by the recipient who wears a blindfold to block out other visual stimuli.

Through this method, users were able to exchange simple messages of “ciao” and “hola” to one another without the use of speech, writing, or body language. Though there were minor errors during the trials, the system was, on average, over 90% accurate. There are other methods that would likely be more accurate, but require being embedded into the users. This EEG method is noninvasive and is therefore the best choice at this stage.

“By using advanced precision neurotechnologies including wireless EEG and robotized TMS, we were able to directly and noninvasively transmit a thought from one person to another, without them having to speak or write,” Pascual-Leone continued. “This in itself is a remarkable step in human communication, but being able to do so across a distance of thousands of miles is a critically important proof-of-principle for the development of brain-to-brain communications. We believe these experiments represent an important first step in exploring the feasibility of complementing or bypassing traditional language-based or motor-based communication.”

Using EEG to transmit information isn’t completely novel, as it has previously used when operating powered wheelchairs. However, this is the first time that the technology has been used to connect human brains directly. In the future, this technology could be used to help communicate with patients who, following disease or injury, are still aware but unable to speak.

Read more


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 11/15/2024 Featuring Adafruit bq25185 USB / DC / Solar Charger with 3.3V Buck Board! (Video)

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: CircuitPython 9.2.1, What is DMA, PyConUS 2025 and More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — Halloween, WiLo, and more!

Maker Business – Adafruit Daily — Checking in on Intel

Electronics – Adafruit Daily — Probe Compensation

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.