Adafruit will not be shipping orders Monday May 27, 2019 Memorial Day Orders placed after 11am EST Friday May 24 will go out Tuesday May 28.
0

Updated Products – Printrbot Simple Kit – 2014 Model / PrintrBot Simple Metal 3D Printer – Black – Assembled

Updated Products – Printrbot Simple Kit – 2014 Model / PrintrBot Simple Metal 3D Printer – Black – Assembled

NewImage

Printrbot Simple Kit – 2014 Model

The Printrbot Simple is an exercise in 3D printing minimalism. It includes only what is needed to get started in the world of 3D printing. After building this kit you’ll have a fully-functioning 3D printer that weighs only 10 lbs and fits nicely on your desk

Please note! the Printrbot is a kit and not for beginners! You’ll get all the parts to assemble your own 3D printer but it does require some technical expertise, time and effort to assemble.

NewImage

As of October 17th, 2014 we are shipping the new version of the PrintrBot Simple Kit with the following features & upgrades:

  • Auto-Leveling Z-Probe – works with software to calibrate Z axis height
  • Aluminum Extruder (direct drive) – 1.75mm Ubis Hot End with 0.4mm nozzle
  • GT2 aluminum 20 tooth dual flange belts
  • GT2 belts on X and Y axis
  • Printerbot Rev F Printerboard with micro-USB connection (cable included) and micro SD card slot for untethered printing
  • Aluminum Z Axis coupler
  • Auto Level sensor
  • Improved rigidity
  • Cleaner design with electronics underneath the printer
  • Clearly labeled laser cut parts for easier assembly
  • All 4 motors are large Nema 17 stepper motors
  • New fan shroud design
  • 4″x4″x4.5″ build
  • 1/4″ acme
  • .1mm resolution layer height
  • 6061 aircraft aluminum – Metal print bed

NewImage

For more information on the PrintrBot Simple Kit, click here!

In stock and shipping now!

NewImage

PrintrBot Simple Metal 3D Printer – Black – Assembled

New from Printrbot, the Metal Simple is a brand new rock solid, all metal, fully-assembled Printrbot Simple! As opposed to the Printrbot Simple Kit, all of the laser cut wood parts have been replaced by rock solid metal and assembled. In fact, the total number of parts have been reduced to just a fraction of the wooden model. The all metal construction combined with a GT2 belt pulley system produces a 3D print that rivals those of other manufacturers which cost thousands more!

NewImage

The Printrbot Simple is an exercise in 3D printing minimalism. It includes only what is needed to get started in the world of 3D printing. With the All-metal Printrbot Simple you’ll have a fully-functioning 3D printer that weighs only 12 lbs and fits nicely on your desk!

NewImage

As of October 17th, 2014 we are shipping the new version of the PrintrBot Simple Kit with the following upgrades:

  • ​Auto-Leveling Probe – works with software to calibrate Z axis height
  • Aluminum Extruder (direct drive) – 1.75mm Ubis Hot End w/ 0.4mm nozzle
  • GT2 Belt
  • 20 tooth, dual flange GT2 aluminum pulleys
  • PrintrBot Rev F Printrboard with micro-USB connection (cable included) and micro SD card slot for untethered printing

In stock and shipping now!


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 10,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython 2019!

Have an amazing project to share? The Electronics Show and Tell with Google Hangouts On-Air is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Robotics manufacturer Anki shuts down

Wearables — Brace for fabric

Electronics — DRC Confusion

Biohacking — Senolytic Therapies

Python for Microcontrollers — CircuitPython 4 released, upcoming hardware, and more! #Python #Adafruit #CircuitPython #PythonHardware @circuitpython @micropython @ThePSF @Adafruit

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.