0

November 5, 2014 AT 5:51 pm

NEW PRODUCT – PRINTinZ Flexible 3D Printer Plate for Printrbot – 168mm x 237mm

2233_gifdemo

NEW PRODUCT – PRINTinZ Flexible 3D Printer Plate for Printrbot – 168mm x 237mm


Removing 3D printed parts from your 3D printer can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate. Over time, chiseling objects off can scratch and damage your plate – and get pretty annoying – so wouldn’t it be great if you could just bend the plate to pop off your parts? Introducing the PRINTinZ Flexible 3D Printer Plate for Printrbot!

This Printer Plate is designed to fit on machine beds that are close to 168mm x 237mm such as the Printrbot Simple Metal. Beware! If you’re looking to use this with the Printrbot Simple Kit – 1405 Model, then you’ll have to cut it down to size.

NewImage

This plate features a copper layer just under the outer skin (on both sides) that allows it to work with the Printrbot inductive proximity sensor for auto-leveling. We also have the 300mm x 300mm PRINTinZ flexible printer plate which is more ideal for the Lulzbot TAZ 4, or it can be cut smaller to fit other machines.

The PRINTinZ Printer Plate was developed as a superior alternative to the print surfaces being used on consumer 3D printers. If you’ve spent any time using a fused filament type of machine like our Printrbots or LulzBot, then you understand the demands on the print surface. The PRINTinZ Printer Plate works with all of our PLA and ABS filaments and can handle up to 100°C!

The plate is intended to be clipped directly onto the metal bed. Clips can be placed anywhere along the front edge, and small binder clips will fit on the rear edge at the very ends of the plate. Don’t put them closer to the middle of the plate or they will interefere with the machine frame.

For more information check Noe & Pedro’s learn guide 3D Printing on NinjaPlate: Flexible Build Plate.

In stock and shipping now!


Check out all the Circuit Playground Episodes! Our new kid’s show and subscribe!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground”Adafruit’s Apps!


Maker Business — Transforming Today’s Bad Jobs into Tomorrow’s Good Jobs

Wearables — Brushing it clean

Electronics — Electrolytic Limitations

Biohacking — High Power Density Human Sweat Battery

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.