Make your room lights and fan voice activated with Arduino and Bluetooth. via instructables
Before I start I would like to thank the instructable user ASCAS for showing me how to use bluetooth in my project. Here is howi learned http://www.instructables.com/id/Voice-Activated-Arduino-Bluetooth-Android/
What I did in this project was use 4 servos to physically turn on and off the lights and fan in my room. It will only work with switches similar to mine. This is great if you dont want to open up your light switches to use a relay. To turn on the lights you can say “lights on” “turn lights on” “turn the lights on” for lights off you can say “lights off” “turn lights off” “turn the lights off” for the fan you can say “fan on” ” turn fan on” and “turn the fan on” for fan off you can say “fan off” ” turn fan off” and “turn the fan off”.
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — Transforming Today’s Bad Jobs into Tomorrow’s Good Jobs
Wearables — Snap a picture
Electronics — To Y5V or not to Y5V?
Biohacking — Quantified Bob’s Experience with Ketone Esters
No comments yet.
Sorry, the comment form is closed at this time.