Projecting a robot’s intentions: MIT allows engineers to read robots’ minds #robotics

NewImage

Via MIT News.

In a darkened, hangar-like space inside MIT’s Building 41, a small, Roomba-like robot is trying to make up its mind.

Standing in its path is an obstacle — a human pedestrian who’s pacing back and forth. To get to the other side of the room, the robot has to first determine where the pedestrian is, then choose the optimal route to avoid a close encounter.

As the robot considers its options, its “thoughts” are projected on the ground: A large pink dot appears to follow the pedestrian — a symbol of the robot’s perception of the pedestrian’s position in space. Lines, each representing a possible route for the robot to take, radiate across the room in meandering patterns and colors, with a green line signifying the optimal route. The lines and dots shift and adjust as the pedestrian and the robot move.

This new visualization system combines ceiling-mounted projectors with motion-capture technology and animation software to project a robot’s intentions in real time. The researchers have dubbed the system “measurable virtual reality (MVR) — a spin on conventional virtual reality that’s designed to visualize a robot’s “perceptions and understanding of the world,” says Ali-akbar Agha-mohammadi, a postdoc in MIT’s Aerospace Controls Lab.

“Normally, a robot may make some decision, but you can’t quite tell what’s going on in its mind — why it’s choosing a particular path,” Agha-mohammadi says. “But if you can see the robot’s plan projected on the ground, you can connect what it perceives with what it does to make sense of its actions.”

Agha-mohammadi says the system may help speed up the development of self-driving cars, package-delivering drones, and other autonomous, route-planning vehicles.

“As designers, when we can compare the robot’s perceptions with how it acts, we can find bugs in our code much faster,” Agha-mohammadi says. “For example, if we fly a quadrotor, and see something go wrong in its mind, we can terminate the code before it hits the wall, or breaks.”

Read more.


As 2022 starts, let’s take some time to share our goals for CircuitPython in 2022. Just like past years (full summary 2019, 2020, and 2021), we’d like everyone in the CircuitPython community to contribute by posting their thoughts to some public place on the Internet. Here are a few ways to post: a video on YouTub, a post on the CircuitPython forum, a blog post on your site, a series of Tweets, a Gist on GitHub. We want to hear from you. When you post, please add #CircuitPython2022 and email circuitpython2022@adafruit.com to let us know about your post so we can blog it up here.

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 32,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Pololu’s account of the chip shortage

Wearables — Monster-inspired costuming!

Electronics — How to make your own magnetic field probe!

Python for Microcontrollers — Python on Microcontrollers Newsletter: New Releases of MicroPython and CircuitPython and more! #Python #CircuitPython @micropython @ThePSF

Adafruit IoT Monthly — 2021 in Recap!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — JP’s Product Pick of the Week 1/18/22 KB2040 Kee Boar @adafruit @johnedgarpark #adafruit #newproductpick

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.