I thought I’d share how cool this looks. I bet if you painted 4 sides of the cubes white and did this with a neopixel matrix it would look super seamless. I was just trying to diffuse them for fiber optic strands.
Neopixel —> Tiny piece of polished acrylic—> drafting paper.
NeoPixel Ring – 12 x WS2812 5050 RGB LED with Integrated Drivers: Round and round and round they go! 12 ultra bright smart LED NeoPixels are arranged in a circle with 1.5″ (37mm) outer diameter. The rings are ‘chainable’ – connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC and you’re ready to rock. (read more)
Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.