0

NeoPixel Driver for the Parallax Propeller

IMG 0122 JPG

Adafruit customer,Chris Cantrell used the NeoPixel NeoMatrix 8×8 for his NeoPixel Driver for the Parallax Propeller

This driver generates the high-frequency data protocol required to talk to a line of NeoPixel RGB LEDs (I used the following 8×8 NeoPixel grid from AdaFruit: https://www.adafruit.com/products/1487). The driver reads pixel data from a pixel buffer in shared memory.

One driver COG can update several lines of NeoPixels. Or separate driver COGS can be spun up to manage each NeoPixel line.

Read more


Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.

Join 7,500+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython in 2018 – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Despite multiple bankruptcies, RadioShack continues to find ways to keep the lights on

Wearables — Molding with glue

Electronics — A few words on inductor resistance

Biohacking — Running Blades

Python for Microcontrollers — Help bring CircuitPython to other languages!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.