Make an LED heart for your Valentine. via instructables
In this article I will try to tell you about the gift I made for my girlfriend!
I got her is an LED heart.
STEP 1:
The basis of the scheme is a microcontroller Atmega8, 1K resistor, selected in such a way as not to overload the microcontroller ports. SMD resistors and diodes, size 1206.
Step 2:
On the reverse side of the board, there are two batteries CR2032, two capacitors, voltage regulator LM7805, and the power button with latching.
Step 3:
In order to fill in the microcontroller firmware, you need to solder the wires to the pads on the board. Around the microcontroller pins are derived for spi interface (MOSI MISO SCK RESET). The firmware can be downloaded here.
Step 4:
Picture of
To formalize the a scheme which I soldered, I placed it in a wooden frame, and make the background and glued two small ladybugs. Valentine’s Day is approaching, a gift sure to enjoy your loved ones people!
Download files PCB and firmware for the microcontroller can be here!
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!