Make your very own open-source, Raspberry Pi linux-powered digital snappy camera with built in rechargeable battery! The SnapPiCam Raspberry Pi Digital Camera is a cool project showing what you can be done with a Raspberry Pi, PiTFT and acrylic enclosure. This is a fairly advanced project, for people who are very comfortable with soldering, assembly, Raspberry Pi hacking, etc!
The Laser-Cut sets can be bought from The LittleBox Company and the other major components are available from Adafruit.
Inside is the 5 megapixel Raspberry Pi camera, this can be either the standard version or the Noir Infrared-sensitive edition. Power comes from a rechargeable 1200mAh LiPo battery. The battery is recharged via a Mini-B USB cable plugged into the built-in LiPo charger. A 2.8″ TFT + Touchscreen at the back allows access to the camera’s GUI.
On the outside can be attached a variety of lenses including Fish-Eyes, Telephoto Lenses, Zoom lenses, and Macro Lenses. On the underside of the SnapPiCam is a standard 1/4-20 Nut for attachment to a Tripod.
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!
Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: The latest on Raspberry Pi RP2350-E9, Bluetooth 6, 4,000 Stars and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey
