Coming Soon! – Adafruit VESA Mount Plus for Raspberry Pi 2 / B+ / A+
The basic Adafruit VESA mount got a facelift!
Introducing the Adafruit VESA Mount Plus for the Raspberry Pi 2 Model B, Model B+, and Model A+! Designed by PaintYourDragon, this is a very versatile mount with support for 75mm and 100mm. Mount your Pi computer to the back of most HDMI monitors! The VESA mount is cut out of clear 3mm acrylic so you can see the LEDs.
This is for Raspberry Pi 2, Model B v2, B+, and A+! If you happen to have a Raspberry Pi Model B v1 without mounting holes, you can use a not-included Edge-Mounting Kit.
- 1x VESA mount
- 3x Nylon spacers
- 4x M4 Machine screws
- 3x 4-40 Machine screws
- 4x Nylon 1/2" pan screws
- 4x Nylon 4-40 hexnuts
- 3x 4-40 Steel hexnuts
- 4x Rubber bumpers
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — Lessons Learned Scaling Airbnb 100X
Wearables — Start with a sketch
Electronics — When do I use X10?
Biohacking — Project Peri – Translates Sound into Light for the Hearing Impaired
No comments yet.
Sorry, the comment form is closed at this time.