Chose your display. There are several different TFT models available and for this build you will not need a high definition display. A cheap 480p display will have a good enough resolution to play the games. Before you start the build it is worth checking that the display connects properly to the Raspberry Pi. At this stage I am still using the Noobs SD card image. Depending on the type of composite cable, you may need to switch around the left audio channel and video. Remember not to have the HDMI cable connected when booting up. If you have issues connecting to the composite output you may find this information useful on editing config.txt from the Raspberry Pi website. Once you have the screen working you may think that the resolution looks too low. Don’t panic – once it is running retro games it will not be an issue.
Each Friday is PiDay here at Adafruit! Be sure to check out our posts, tutorials and new Raspberry Pi related products. Adafruit has the largest and best selection of Raspberry Pi accessories and all the code & tutorials to get you up and running in no time!
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.