0

Make your Raspberry Pi Portable #piday #raspberrypi @Raspberry_Pi #iLuvPi2

From instructables user mathesen1097:

This is a very simple instructable that will show you how to put together a little portable Raspberry Pi. Watch the video for visual instructions:Video

-A Raspberry Pi

This could be any raspberry pi, but I chose the Raspberry Pi 2. If you use the Raspberry Pi 2, B+, or A+, than you will also need a micro SD card. For older Raspberry Pi models, you will need an SD card.

-Portable USB Power supply

-Project Enclosure:Could be anything you like, so long as everything still fits inside. Use your imagination

-4-40 Round Head screws and bolts

-Adafruits 2.8″ Capacitive Touchscreen PiTFT (NOTE: Could be any of Adafruits PiTFT series, I just chose this model)

-Keyboard and mouse

Tools

-Dremel with cutoff and sanding bit

-Drill with 7/64 or 1/8 drill bit

-Flathead Screwdriver

Full instructable


Featured Adafruit Products!

NewImage

PiTFT 2.8″ TFT 320×240 + Capacitive Touchscreen – Raspberry Pi Model B: Our best-selling PiTFT 2.8″ display just got a fancy upgrade, now we have a version with a capacitive touchscreen! That’s right, instead of a resistive touchscreen, which requires a fingernail or stylus, you can now use a fingerpad. The screen looks much nicer, with a black bezel and glass overlay. (read more or checkout the assembled version)



998Each Friday is PiDay here at Adafruit! Be sure to check out our posts, tutorials and new Raspberry Pi related products. Adafruit has the largest and best selection of Raspberry Pi accessories and all the code & tutorials to get you up and running in no time!


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 12,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython 2019!

Have an amazing project to share? The Electronics Show and Tell with Google Hangouts On-Air is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — SiFive is a startup to pay attention to. RISC-5 is here to stay.

Wearables — Swatch it up

Electronics — Code like everyone’s watching

Biohacking — Stroboscopic Visual Training

Python for Microcontrollers — CircuitPython takes flight! All aboard with datum, Bluefruit CPX, and more! #Python #Adafruit #CircuitPython #PythonHardware @circuitpython @micropython @ThePSF @Adafruit

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.