Gather And Chart Temperatures With A Raspberry Pi #piday #raspberrypi @Raspberry_Pi
Gather and chart temperatures using RRDTool and Hoghcharts. via Tafkas Blog
For quite a long time I was looking for a way to monitor and record th temperature and humidity at my apartment. What was missing was a convenient, preferably wireless solution. After receiving my RaspberryPi I started to look into that more intensively.
The USB Weather Data Receiver USB-WDE1 wirelessly receives data from various weather sensors of ELV at 868 MHz. The receiver is connected to a USB port on the computer, so no additional power supply is required. The data is transmitted via a simple serial ASCII protocol, which is well documented by ELV. The RasberryPi running Raspbian is used for the data acquisition allowing very little power consumption while being completely flexible.
Each Friday is PiDay here at Adafruit! Be sure to check out our posts, tutorials and new Raspberry Pi related products. Adafruit has the largest and best selection of Raspberry Pi accessories and all the code & tutorials to get you up and running in no time!
Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.