The controller will rotate your GoPro over a set angle for a set duration or will rotate you GoPro for a full rotation for a set duration.
This project is based on the original instructable by Tyler Winegarner See instructable here and also from Mark Wheeler’s version of Tyler Winegarner’s instructable See Mark Wheeler’s instructable here or his web site here .
My instructable combines software and hardware from both versions as well as adding some different build and control options of my own. further details on my web site.
I have added code for a 4×20 I2C LCD display and switches rather than the SainSmart LCD Keypad Shield. I have also removed the Arduino UNO shield and replaced it with an Arduino Atmega 328 mounted on vero board. Full schematics and vero board layouts included.
Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.