NeoPixel Coat made with Arduino Gemma #WearableWednesday
Nice coat project from Instructables user evolve1383!
This is a fun and easy way to add some LIGHT to an article of clothing. Before beginning this project, I had a few hours of Arduino microcontroller experience and no experience working with conductive thread. I recommend that you have some basic Arduino experience before beginning this project. Experience sewing with a machine and by hand was helpful but not required.
I welcome any feedback or suggestions you might have to improve my tutorial. Thanks!
Arduino GEMMA – Miniature wearable electronic platform: What do you get when you combine an Adafruit classic with geniuses at Arduino? The Arduino GEMMA! It’s a tiny wearable platform board with a lot of might in a 1″ diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you’ll be able to realize any wearable project. Read more.
Flora RGB Smart NeoPixel version 2 – Sheet of 20: So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here’s a sheet of Flora NeoPixels fresh from the (reflow) oven. Cut them off as you need ’em and save a pretty penny while you’re at it. Read more.
Every Wednesday is Wearable Wednesday here at Adafruit! We’re bringing you the blinkiest, most fashionable, innovative, and useful wearables from around the web and in our own original projects featuring our wearable Arduino-compatible platform, FLORA. Be sure to post up your wearables projects in the forums or send us a link and you might be featured here on Wearable Wednesday!
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.
Every Wednesday is Wearable Wednesday here at Adafruit! We’re bringing you the blinkiest, most fashionable, innovative, and useful wearables from around the web and in our own original projects featuring our wearable Arduino-compatible platform, FLORA. Be sure to post up your wearables projects in the forums or send us a link and you might be featured here on Wearable Wednesday!