Editor’s note: The Raspberry Pi’s broadcast frequency can range between 1Mhz and 250Mhz, which may interfere with government bands. We advise that you limit your transmissions to the standard FM band of 87.5MHz–108.0MHz (see Step 5) and always choose a frequency that’s not already in use, to avoid interference with licensed broadcasters.
What better way to celebrate the launch of the tiny, $5 Raspberry Pi Zero than to build a project. The Raspberry Pi Pirate Radio is one of our favorite builds here at Make:, so it was an obvious pick to port to the new board. In case you missed our first crack at Pirate Radio, try it building it while you wait for your Pi Zero to arrive. PiFM was originally written by Oliver Mattos and Oskar Weigl, and revised by Ryan Grassel.
Pirate Radio is an extremely simple build: Cut and solder one wire to the Pi. The software installation and configuration doesn’t take too long either. Here is how we shrunk down the Pirate Radio into into a Pirate Radio throwie.
Each Friday is PiDay here at Adafruit! Be sure to check out our posts, tutorials and new Raspberry Pi related products. Adafruit has the largest and best selection of Raspberry Pi accessories and all the code & tutorials to get you up and running in no time!
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Maker Business — Transforming Today’s Bad Jobs into Tomorrow’s Good Jobs
Wearables — Hot glue free zone
Electronics — Have you met Charlie?
Biohacking — Ticks are Spreading an Allergy to Meat
No comments yet.
Sorry, the comment form is closed at this time.