During a recent photo shoot I had an opportunity to do some daytime light painting with model Mely who posed for me. Here Mely protects a bag of peanuts from the hungry Nutcrackers painted in the background using my latest version 3 LED light stick. She did excellent work holding still for the long exposures.
My camera is on a tripod as I trigger the camera shutter from the light stick to begin painting the background.
Teensy (ATmega32u4 USB dev board) 2.0 – ATmega32u4: The Teensy 2.0 is a complete USB-based microcontoller development system, in a very small footprint! All programming is done via the USB port. No special programmer is needed, only a standard “Mini-B” USB cable and a PC or Macintosh with a USB port. (read more)
Adafruit CC3000 WiFi Breakout with uFL Connector for Ext Antenna – v1.1: For years we’ve seen all sorts of microcontroller-friendly WiFi modules but none of them were really Adafruit-worthy. Either they were too slow, or too difficult to use, or required signing an NDA, or had limited functionality, or too expensive, or too large. So we shied away from carrying any general purpose microcontroller-friendly WiFi boards. No longer! (read more)
We #celebratephotography here at Adafruit every Saturday. From photographers of all levels to projects you have made or those that inspire you to make, we’re on it! Got a tip? Well, send it in!
Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.