On Mondays we’ll CNC mill designs and showcase settings, use cases and of course, Time-lapses!
Can you CNC Mill on the back of an iPhone? Yes you can! It’s terrifying, but cool. Remember to stay safe kids!
Sparky The Blue Smoke Monster
Othermill by Other Machine Co
12,000 RPM Spindle
Tool: Engraving Bit
Plunge: 0.591 (15 mm/min)
Feed rate: 7.087 in/min
Print Time 00:56:00
Visit the Adafruit shop online – http://www.adafruit.com
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Maker Business — Transforming Today’s Bad Jobs into Tomorrow’s Good Jobs
Wearables — Make metallic magic
Electronics — Inadequate volt signal
Biohacking — Arduino Based “Row Bots” Test Rowing Efficiency
No comments yet.
Sorry, the comment form is closed at this time.