You may not believe what your eyes are about to feast upon – but this is real!
Watch it in operation:
The unique combination of laser deposition welding with a powder nozzle and milling on the LASERTEC 65 3D, is an innovative generative machining method. It allows a faster production of complex geometries and individual 3D-parts. Especially large components up to Ø 500 mm can be produced cost-effectively with this hybrid solution. The flexible changeover between laser and milling operations enables the direct machining of areas that can no longer be reached later on the finished part.
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — Lessons Learned Scaling Airbnb 100X
Wearables — Start with a sketch
Electronics — When do I use X10?
Biohacking — Project Peri – Translates Sound into Light for the Hearing Impaired
No comments yet.
Sorry, the comment form is closed at this time.