A small board for making a four pole crystal ladder filter via sync channel Thanks Drew for sending this in!
This type of filter has a very high Q and narrow bandwidth, allowing you to select a specific frequency from your signal. Because of the narrow bandwidth, selection of the capacitors and tuning of the filter is important to achieve the desired response. You will want to test your filter after designing and assembling it to verify performance.
Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.