This was created to provide a case/stand for a bedside console that controls home automation using Universal Devices ISY-994 via a Raspberry Pi with an Adafruit 3.5″ PiTFT. The related software is at https://github.com/kevinkahn/softconsole but of course the case could be used for any RPi+PiTFT application. Printed successfully in ABS. All screws are metric M2.5. The short screws that hold the Pi to the case are 12 mm. The long screws that hold the display are 28mm. The screws that are used in the stand are also 12mm. The screws that secure the lid are 10mm but 12s or 8s would probably also work fine.
Eink, E-paper, Think Ink – Collin shares six segments pondering the unusual low-power display technology that somehow still seems a bit sci-fi – http://adafruit.com/thinkink
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.