Adafruit will not be shipping orders Thanksgiving Day, Thursday November 22, 2018. Expedited orders placed after 11am ET Wednesday November 21 will go out Friday November 23.
0

Open Source Window Cleaning

water-brush

Peter Hertel shared on YouMagine:

Water fed brush connector holder

This is a work in progress and have not been tested thoroughly in the field yet. Here are my first impressions using it as a alternative to a regular WFP. One thing I did not think about when working like this; you are so much closer to the window, and thus you get wet from the water splashing back at you, especially when scrubbing. The bristles on this car brush seems a bit too soft, as they don’t scrub away very much grime. Though this was a first clean so they were rather dirty. The long handle on this particular brush makes it difficult to get a lot of pressure on the head for some reason, I might build a brush with a shorter handle next time. The top nozzle could benefit from sitting higher on the brush as you have to angle the brush a bit awkwardly.
I’d rather have a wider brush head for this kind of job.


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 8,700+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Spotlight on Makeblock, one of the latest companies to find success in the STEAM market

Wearables — The press of a button

Electronics — Avoid serial confusion!

Biohacking — BDNF a Biohackers Best Friend

Python for Microcontrollers — The Python powered synth is here @circuitpython @micropython @ThePSF #Python

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.