By far my most favorite case to date. Small, compact, and interesting. The only screws required are to mount the 40mm fan in to opening. I used 4 #4 x .375 Phillips flat head sheet metal screws. I still need to c-sink the holes to mount it from the pictures. The bottom is just snap in so you may need to adjust scale if you have any issues but mine was spot on. This is for the people that want to show off their PI and not just hide it 🙂 I can add IO pin cutouts if anyone would like them or the other 2 ribbon cable connections but as I see it this is all you need for displaying your Pi. I did test my hdmi cable and micro usb plugs and there is plenty of clearance. There is a chance some of those more clunky cheap style cables may cause interference but I suggest just get some nicer cables.
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.