It is designed to fit with 1/4 smooth or threaded rods. But actually I had to enlarge the holes with a drill! The best thing is that you can cut the rod the length you need.
Probably that 6mm rods will fit as well… even better as they are 0,35mm smaller!
It was designed to be fixed with 2 screws, but only one is solid enough for me.
I used #6 5/8 screws witch can be found in any hardware store.
It can fit under a bar, under kitchen cabinets etc.
You have to adjust the width between them using your wine glass. It has to be as tight possible to let de glass foot go between the 2 printed parts.
Hope you’ll take some pictures and publish “make”
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — SoftBank Invests $300 Million in WeWork
Wearables — Foam feathers
Electronics — Have the need for speed? This diode might be right for you
Biohacking — Daptly to Release a Commercial Smart Mirror
No comments yet.
Sorry, the comment form is closed at this time.