This is the FeatherWing Tripler – a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are three! The magic of the Tripler comes when you want to connect your Feather to two other Feather Wings without needing any stacking headers! The Tripler comes with:
The Tripler, like the Proto, has three breakouts for each pin on a Feather, as well as a bunch of plain grid proto holes. Also, the three sets of pins are cross connected and for GND and 3.3V, we give you a full strip of connected pads.
You’ll need to solder on the female headers to the PCB, the Tripler comes as a mini kit!
Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.
