Thanks to Tapani for sending in this tip! Tapani writes:
I recently completed a personal wearable project that might be of interest to your readers. It was built using all Adafruit components:
Flora, LSM9DS0, NeoPixel ring, battery. I wrote an article about on LinkedIn
Pulse and Medium:
Featured Adafruit Product!
FLORA – Wearable electronic platform: Arduino-compatible – v3: FLORA is Adafruit’s fully-featured wearable electronics platform. It’s a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit’s support, tutorials and projects. Check out dozens of FLORA tutorials on the Adafruit Learning System, with more added all the time! (read more)
FLORA 9-DOF Accelerometer/Gyroscope/Magnetometer – LSM9DS0 – v1.0: Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors. Inside are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a 3-axis magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. The third is a 3-axis gyroscope that can measure spin and twist. By combining this data you can REALLY orient yourself. (read more)
NeoPixel Ring – 16 x 5050 RGB LED with Integrated Drivers: Round and round and round they go! 16 ultra bright smart LED NeoPixels are arranged in a circle with 1.75″ (44.5mm) outer diameter. The rings are ‘chainable’ – connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC (4-7V works) and you’re ready to rock. (read more)
Every Wednesday is Wearable Wednesday here at Adafruit! We’re bringing you the blinkiest, most fashionable, innovative, and useful wearables from around the web and in our own original projects featuring our wearable Arduino-compatible platform, FLORA. Be sure to post up your wearables projects in the forums or send us a link and you might be featured here on Wearable Wednesday!
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — SoftBank Invests $300 Million in WeWork
Wearables — Circuit star
Electronics — Storage Safety 101
Biohacking — Quantified Self Project Combines 100 Pieces Flute Music into a Single Infographic
No comments yet.
Sorry, the comment form is closed at this time.