thing inspired by:
I started with different way of Dremel attachment and decided to redesign the whole thing.
I added a knob to threaded rod. There is slot for a small piece of 1mm thick metal sheet that goes to the slot in threaded rod. You can glue the knob on rod after you assemble the whole thing. There is a M6 nut soldered on rod on the other side.
In the chuck part, there are three plugs to cover the rods. Glue them in with superglue.
I designed two types of Carriage. One is the same height as the Chuck/Stock axis. The V2 is smaller and you can put some adapter on it.
download the files on: http://www.thingiverse.com/thing:2236103
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Maker Business — Transforming Today’s Bad Jobs into Tomorrow’s Good Jobs
Wearables — Brushing it clean
Electronics — Electrolytic Limitations
Biohacking — High Power Density Human Sweat Battery
No comments yet.
Sorry, the comment form is closed at this time.