Featured Adafruit Product!
20mm Coin Cell Breakout w/On-Off Switch (CR2032): Simple but effective – this sewable breakout board has a CR2032 coin cell battery holder soldered on, an on/off switch and 0.1″ pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There’s two ground pins, one ‘switched’ power pin, and one pin that is always on. Read more.
Every Wednesday is Wearable Wednesday here at Adafruit! We’re bringing you the blinkiest, most fashionable, innovative, and useful wearables from around the web and in our own original projects featuring our wearable Arduino-compatible platform, FLORA. Be sure to post up your wearables projects in the forums or send us a link and you might be featured here on Wearable Wednesday!
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — Transforming Today’s Bad Jobs into Tomorrow’s Good Jobs
Wearables — Not a loophole
Electronics — Rule of thumb: 10mils per amp.
Biohacking — Soft Artificial Human Heart #3DThursday #3DPrinting
No comments yet.
Sorry, the comment form is closed at this time.