Check Out Dinara Kasko’s Geometric Pastries, CNC’d Chocolate, and 3D-Printer Assisted Desserts | #3DThursday
One more creation for SoGood magazine. Cake “Lime-basil triangulation”. Mousse lime-basil with Italian merengue, lime mousse-marshmallow, confit lime-basil, sponge cake, crunchy layer with almond. The idea was to use geometrical shapes, connect the patisserie and the architecture, and make unique creations for SoGood. The work consisted from 3D modeling, 3D printing and casting silicon. I used triangulation principle for this cake.
Today with my friends we were trying to cut out something on a chocolate surface using a milling-machine. The experiment succeeded and we got two words Valrhona with different edge, drill bit rotated clockwise and anticlockwise. I’m going to cut out something more complex with the machine.
A new mould 3*3*3 spheres from the series Geometric desserts and the raspberry cake inside. You can order the silicone mould at www.dinarakasko.com/shop
The shape looks very cool, and you want to bite off one of the balls. ? Suitable for glazing and covering with chocolate spray, but I’d advise you to dip the cake in the glaze, as shown in the video.
Inside: pistachio sponge cake, raspberry mousse with rose, raspberry cream, confit raspberry – black currant.
Video of 3D modeling and printing my Cherry cake. Read more about the cake and how we model it here www.dinarakasko.com/cherry-cake/
The Ultimaker was moving a little during printing, I should have fixed it stronger. The printing process took almost 3 days, it was normal quality. I used intervalometer in Magic Lantern with my Canon 5d2 to shoot the printing process and After Effects to make the video, if you are wondering.
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.
Python for Microcontrollers — Python on Microcontrollers Newsletter: MicroPython Pico W Bluetooth, CircuitPython 8.0.4 and much more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
