The goal of this project is to build an IoT style motorized pet door so we can control which animals can come into the house. For this we are using BLE tags attached to the animals (cats) and the built-in Bluetooth module on the Raspberry Pi 3 which scans for the tags. We also have some indicator LEDs on the Raspberry Pi 3 for troubleshooting what state the door is supposed to be in.
The Node-RED BLE Scan node continuously scans for BLE advertisements. If it sees one that matches the device name and minimum RSSI it will open the pet door, and after a timeout period it will close the door. In order to prevent the door from closing prematurely on a slow-moving animal, the system will reset the timer whenever it gets a BLE match.
Each Friday is PiDay here at Adafruit! Be sure to check out our posts, tutorials and new Raspberry Pi related products. Adafruit has the largest and best selection of Raspberry Pi accessories and all the code & tutorials to get you up and running in no time!
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — Lessons Learned Scaling Airbnb 100X
Wearables — Start with a sketch
Electronics — When do I use X10?
Biohacking — Book Recommendation: Autonomous by Annalee Newitz
No comments yet.
Sorry, the comment form is closed at this time.