Day 3 – we’re half way through our Internet of Things gift guides! Check out days 1 and 2 here and read below for Mini FONAs!
Adafruit FONA – Mini Cellular GSM Breakout uFL Version: Ring, Ring! Who’s that callin’? It’s your breadboard! Introducing Adafruit FONA MiniGSM, an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package.
This module measures only 1.75″x1.25″ but packs a surprising amount of technology into its little frame. At the heart is a GSM cellular module (we use the latest SIM800) the size of a postage stamp. This module can do just about everything.
- Quad-band 850/900/1800/1900MHz – connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)
- Make and receive voice calls using a headset OR an external 8Ω speaker + electret microphone
- Send and receive SMS messages
- Send and receive GPRS data (TCP/IP, HTTP, etc.)
- Scan and receive FM radio broadcasts (yeah, we don’t exactly know why this was included but it works really well)
- PWM/Buzzer vibrational motor control
- AT command interface with “auto baud” detection
Sounds delicious, right? So we plated this fine module onto a little breakout with all the extras you need to make your next project shine:
- Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and done
- Standard 4-pole TRRS headphone jack. Use any ‘Android’ or ‘iPhone’-compatible headset with mic
- Breakouts for external 8Ω speaker and electret mic if you don’t want to use a headphone
- Level shifting circuitry so you can run it with 2.8V to 5V logic.
- Vibrational motor (buzzer) driver so you can have noiseless notifications
- uFL connections for external antenna
- Indicator LEDs for power and network connectivity
- Standard SIM slides into the back
On its own, this module can’t do anything. It requires a microcontroller to drive it! We suggest and use an Arduino but any 3-5V microcontroller with a UART can send and receive commands over the RX/TX pins. (read more)
Related Guides in the Adafruit Learning System:
Adafruit FONA – Mini Cellular GSM Breakout – SMA Version – v1: Ring, Ring! Who’s that callin’? It’s your breadboard! Introducing Adafruit FONA MiniGSM, an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package.
This module measures only 1.75″x1.25″ but packs a surprising amount of technology into its little frame. At the heart is a GSM cellular module (we use the latest SIM800) the size of a postage stamp. This module can do just about everything.
- Quad-band 850/900/1800/1900MHz – connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)
- Make and receive voice calls using a headset OR an external 8Ω speaker + electret microphone
- Send and receive SMS messages
- Send and receive GPRS data (TCP/IP, HTTP, etc.)
- Scan and receive FM radio broadcasts (yeah, we don’t exactly know why this was included but it works really well)
- PWM/Buzzer vibrational motor control
- AT command interface with “auto baud” detection
Sounds delicious, right? So we plated this fine module onto a little breakout with all the extras you need to make your next project shine
- Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and done
- Standard 4-pole TRRS headphone jack. Use any ‘Android’ or ‘iPhone’-compatible headset with mic
- Breakouts for external 8Ω speaker and electret mic if you don’t want to use a headphone
- Level shifting circuitry so you can run it with 2.8V to 5V logic.
- Vibrational motor (buzzer) driver so you can have noiseless notifications
- SMA connection for external antenna
- Indicator LEDs for power and network connectivity
- Standard SIM slides into the back
Cellular modules can be a bit challenging to use, the FONA is intended for hackers and advanced makers. We’re still adding library support for all the various things the FONA can do but there may be updates as FONA is used around the world!
On its own, this module can’t do anything. It requires a microcontroller to drive it! We suggest and use an Arduino but any 3-5V microcontroller with a UART can send and receive commands over the RX/TX pins. (read more)
Related Guides in the Adafruit Learning System:
- PiPhone – A Raspberry Pi based Cellphone
- Network Interface Failover using FONA
- MQTT, Adafruit IO & You!
Adafruit FONA 808 – Mini Cellular GSM + GPS Breakout: Cellular + GPS tracking, all in one? Oh yes! Introducing Adafruit FONA 808 MiniGSM + GPS, an all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project in an adorable little package. (It does not contain a drum machine, tho)
This module measures only 1.75″x1.6″ but packs a surprising amount of technology into it’s little frame. At the heart is a powerful GSM cellular module (we use the latest SIM808) with integrated GPS. This module can do just about everything.
- Quad-band 850/900/1800/1900MHz – connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)
- Fully-integrated GPS (MT3337 chipset with -165 dBm tracking sensitivity) that can be controlled and query over the same serial port
- Make and receive voice calls using a headset or an external 32Ω speaker + electret microphone
- Send and receive SMS messages
- Send and receive GPRS data (TCP/IP, HTTP, etc.)
- PWM/Buzzer vibrational motor control
- AT command interface with “auto baud” detection
Here’s the GPS specifications:
- 22 tracking / 66 acquisition channels
- GPS L1 C/A code
- Sensitivity: Tracking: -165 dBm, Cold starts : -147 dBm
- Time-To-First-Fix: Cold starts: 32s (typ.), Hot starts: 1s (typ.), Warm starts: 5s (typ.)
- Accuracy: approx 2.5 meters
Sounds delicious, right? So we plated this fine module onto a little breakout with all the extras you need to make your next project shine:
- Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and done
- Standard 4-pole TRRS headphone jack. Use any ‘Android’ or ‘iPhone’-compatible headset with mic
- Breakouts for external 32Ω speaker and electret mic if you don’t want to use a headphone
- Level shifting circuitry so you can run it with 2.8V to 5V logic.
- Vibrational motor (buzzer) driver so you can have noiseless notifications
- uFL connections for external antennas
- Indicator LEDs for power and network connectivity
- Standard SIM slides into the back
On its own, this module can’t do anything. It requires a microcontroller to drive it! We suggest and use an Arduino but any 3-5V microcontroller with a UART can send and receive commands over the RX/TX pins.
You will also need some required accessories to make FONA work. (read more)
Related Guide in the Adafruit Learning System:
Adafruit FONA 808 Shield – Mini Cellular GSM + GPS for Arduino: Cellular + GPS tracking, all in one, for your Arduino? Oh yes! Introducing Adafruit FONA 808 GSM + GPS Shield, an all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project, in Arduino shield format for easy use.
This shield fits right over your Arduino or compatible. At the heart is a powerful GSM cellular module (we use the latest SIM808) with integrated GPS. This module can do just about everything
- Quad-band 850/900/1800/1900MHz – connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)
- Fully-integrated GPS (MT3337 chipset with -165 dBm tracking sensitivity) that can be controlled and query over the same serial port
- Make and receive voice calls using a headset or an external 32Ω speaker + electret microphone
- Send and receive SMS messages
- Send and receive GPRS data (TCP/IP, HTTP, etc.)
- PWM/Buzzer vibrational motor control
- AT command interface with “auto baud” detection
Here’s the GPS specifications:
- 22 tracking /66 acquisition channels
- GPS L1 C/A code
- Sensitivity
Tracking: -165 dBm
Cold starts : -148 dBm - Time-To-First-Fix
Cold starts: 32s (typ.)
Hot starts: 1s (typ.)
Warm starts: 5s (typ.) - Accuracy: approx 2.5 meters
Sounds delicious, right? So we plated this fine module onto a shield with all the extras you need to make your next project shine
- Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge via the Arduino when necessary. Two LEDs let you know when its charging and done. You can then flip the switch and use the battery to run your circuit!
- Standard 4-pole TRRS headphone jack. Use any ‘Android’ or ‘iPhone’-compatible headset with mic
- Breakouts for external 32Ω speaker and electret mic if you don’t want to use a headphone
- Level shifting circuitry to make it Arduino-safe
- Vibrational motor (buzzer) driver so you can have noiseless notifications
- uFL connection for external passive GPS & external GSM antenna
- Indicator LEDs for power and network connectivity
- Any standard 2G SIM slides into a secure connector
On its own, this shield can’t do anything. It requires a microcontroller like an Arduino to drive it! You will also need some required accessories to make FONA work. These are not included (read more)
Related Guide in the Adafruit Learning System:
We’re excited for the Holiday Season here at Adafruit and we can’t wait to share that excitement with you! Tune into the Adafruit Blog for six weeks of hand picked Adafruit Holiday Gift Guides featuring Adafruit products, projects and more starting Monday November 13.
Still not sure if you’re on the right gift giving track? Gift Certificates are the perfect cyber-present for the electronics geek in your life and are available at any time. When in doubt contact us!
Free Deals
Adafruit offers exciting deals and free items when you shop with us.
As of October 9th, 2017 12:00 PM ET we are offering a number of free products for orders starting at $99 or more!
For orders of $99 or more – a free Adafruit Perma-proto half-size breadboard
For orders of $149 or more – a free Adafruit Trinket M0
For orders of $200 or more – free UPS ground shipping (*Continental USA only)
For orders of $249 or more – a free Adafruit Gemma M0
If you love CircuitPython, then you’ll love this promotion! The Trinket M0 and GEMMA M0 are both great boards for getting going with CircuitPython.
Adafruit Holiday Shipping Deadlines 2017
Here are your 2017 shipping deadlines for ordering from Adafruit. Please review our shipping section if you have specific questions on how and where we ship worldwide for this holiday season.
The Adafruit Shipping Department works hard to get your orders out as quickly as we can, but once they’re in the hands of our carriers they’re out of our control. Carriers have been struggling to keep up with the sharp rise in online orders. UPS, FedEX, and USPS all experienced delivery delays over the last few years.
So all the Adafruit Shippers say: Please be sure you get your gifts early! Order as soon as you can! Once you place your order we’ll ship like the wind!
Please note: We do not offer Saturday or Sunday service for DHL, UPS or USPS.
Monday, Dec. 25, 2017, Christmas, no DHL, UPS or USPS pickup or delivery service.
Monday, Jan. 1, 2018, no DHL, UPS or USPS pickup or delivery service.
Domestic Orders
UPS Ground: Place orders by Friday 11 am ET – December 8, 2017 – There is no guarantee that UPS Ground packages will arrive by December 22, 2017.
UPS 3 Day: Place orders by Thursday 11 am ET – December 14, 2017 – Arrive by 12/22/2017.
UPS 2 Day: Place orders by Friday 11 am ET – December 15, 2017 – Arrive by 12/22/2017
UPS Next Day: Place orders by Monday 11 am ET – December 18, 2017 – Arrive by 12/22/2017.
USPS First Class and USPS Priority: Place orders by Friday– December 8, 2017 – Arrive by 12/22/2017 or sooner.
International Orders
USPS First Class Mail International: Place orders by Friday – November 18, 2017. Can take up to 30 days or more with worldwide delays and customs. Should arrive by 12/22/2017 or sooner, but not a trackable service and cannot be guaranteed to arrive by 12/22/2017.
USPS Express Mail International: Place orders by Friday – December 1, 2017. Can take up to 15 days or more with worldwide delays and customs. Should arrive by 12/22/2017 or sooner.
UPS WORLDWIDE EXPRESS, UPS WORLDWIDE EXPEDITED and UPS EXPRESS SAVER (UPS International orders): Place orders by Friday 11 am ET – December 8, 2017 – There is no guarantee that international packages will arrive by December 22, 2017.
DHL EXPRESS WORLDWIDE: Place orders by Friday 11 am ET – December 8, 2017 – There is no guarantee that international packages will arrive by December 22, 2017.