#AVRFreaks – Building communities (notes) The AVR wiki (@ATMEL) on AVRFreaks is no more …?

Adafruit 3149
Starting back in 2004, AVRFreaks.net was -THE- place for micro-controllers. If it was being done with an AVR, it was on AVRFreaks.

Over 10 years ago, when Adafruit was still just “ladyada” in an apartment or a warehouse space, she posted on AVRFreaks.net, the (at the time) leading resource for AVR xhips (owned & supported by ATMEL, AVRFreaks.net started in 2004).

Ladyada posted up a useful resource “Micro Annoyances – For all the little things that took you 2 weeks to figure out.” It was rejected by the moderatpr there, along with anything Arduino related – AVRfreaks.net is the same place responsible for the genesis of my article WHY ARDUINO WON & WHY IT’S HERE TO STAY – after seeing the un-warm welcome from “Level: Raving Lunatic” (their label) community leader stating “Arduino: baby-talk programming for pothead”… any way, here’s what was said to ladyada, by a moderator on AVRfeaks.net with over tens-of-thousands of posts on Mar 26, 2007:

“When this thread and your site are long forgotten people will still be being directed to the Atmel site…”

It must have had an impact. Ladyada emailed me that night over 10 years ago, and then a day ago last week when we both noticed the ATMEL wiki was gone.

Adafruit 3151
…let’s do something better.

Adafruit 3147
Welp, it’s gone from Atmel and Atmel is mostly is gone, where the wiki went? Not sure. Maybe it’s a forum post now, but I could not find it. There are archives on archive.org.

Adafruit 3148
Ladyada.net is still around http://www.ladyada.net/resources/ucannoyances.html – the Atmel site / wiki is not, and ATMEL is now owned by Microchip. Looks like AVRFreaks / ATMEL wiki now just has general topics and new code of conduct.

Why post this? When I got started with AVRs, the AVRFreaks.net forums frequently shut beginners down and ridiculed, especially beginners using Arduino -and- helpful engineers like ladyada who just wanted to participate and be part of the community in some way. I found other places, and helped build instead, so did others. Perhaps it was better for everyone long-term, there are dozens of welcoming communities, Adafruit & ladyada are still around, and we’ve worked hard to have a community that brings people together. Maybe for some of us, bad experiences make us try harder and be better people, I wish that wasn’t so motivating, so often, and so many bad things need to happen for good to come it seems. I had a decade-long todo’ – I suppose it’s checked off in some way. These are notes to myself, maybe 10 years from now I’ll look at this post and remember something important, or maybe it’s 10 years from now already and time moves in ways we do not always understand and I am telling my current self to write this, or I’m posting this, 10 years ago. Either way, publishing is better than not publishing.

Lessons learned:

  1. Welcome beginners, it’s the right thing to do. We were all beginners. I hope to be a beginner always for something.
  2. Have a code of conduct from the start, not an after-thought or to later enforce community norms -after- it’s all broken. Start early.
  3. It was not good to be snarked on by moderators in communities, moderators set the tone, why should anyone who is learning or sharing be shunned and pushed away by moderators & “Level: Raving Lunatics”
  4. How many people were turned off by toxic vibes towards beginners? Hundreds, if not thousands. Imagine all those people sharing and helping.
  5. Making sites and resources outside giant companies is good idea. Publish to-and-from, have your own copies, publish, don’t just rely on the social media sites like Facebook, Google+, Twitter, Instagram, etc. IndieWeb is important.
  6. Donate to archive.org.
  7. Be excellent to one another.
  8. Ladyada used to email me things late at night she would work on for 10 years to make something better for all of us it seems.

A bigger question is – what does it mean when companies “buy” or aquire communities? Or -are- communities and later purchased? Autodesk did a good job with Instructables, that’s just my opinion. Yahoo/Verizon with Tumblr, not so much.

AVRFreaks is for the most part seems to be over, at least that chapter of micro-controllers and AVR, there were few lessons to be learned, so I’m putting this up here for future reference and notes-to-self.


Avr Man
@TheAVRMan twitter is still around (last update 2/2016). Blog is gone. The @atmel twitter is now a suspended account and atmel.com is down (at least most of it) – there is notice “As of December 31, 2017, the ATMEL website will be redirected to MICROCHIP.com” and “Notice Regarding Personal Information Transfer from Atmel to Microchip.”

Sam
We proposed AVR woman to ATMEL for years. AVR Sam. Samantha, with her ultra fast 32-bit logic she’s 4 times faster and smarter than AVRMAN’s 8-bits. Sam was inspired by Annie Easley – computer scientist, mathematician, and rocket scientist.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. Thanks for posting this. It is easy to assume that circumstances like this are normal, if not desirable. And it is easy to go along with prevailing ugliness.

    Adafruit has built something much better, and it is a great example for other online communities.

Sorry, the comment form is closed at this time.