President of the Borough of Manhattan Gale A. Brewer @galeabrewer @adafruit #madeinmanhattan


President of the Borough of Manhattan Gale A. Brewer visits Adafruit (video) –

Gale A. Brewer is the 27th Manhattan Borough President, responsible for advising the Mayor and City Council on borough concerns, commenting on all land-use matters in the borough, advocating for the borough in the municipal budget process, and appointing members of Manhattan’s 12 Community Boards. The Borough President also chairs the Borough Board, made up of City Council Members and Chairs from the Community Boards, and the Borough Services Cabinet, composed of senior officials from City agencies delivering services in the borough.

Ms. Brewer previously served on the City Council for 12 years, from 2002 through 2013, representing the 6th Council District which includes most of the Upper West Side and northern Clinton. As Councilmember, she successfully passed legislation guaranteeing paid sick leave for most hourly employees, compelling landlords to fix repeat violations, requiring all City data be published online, and the nation’s first law protecting domestic workers. She was the founding chair of the Council’s Technology Committee in 2002.

Immediately prior to her election to the City Council, Brewer served as Project Manager for the NYC Nonprofits Project at CUNY’s Graduate Center, and before that worked for the Telesis Corporation, a private firm that builds affordable housing in New York City.

Prior to that non-profit and private-sector experience, Brewer served in City government in various roles, including as…

New York City Deputy Public Advocate for Intergovernmental Affairs under Mark Green (1994-1998).

Director of Mayor Dinkins’ Federal Office in New York City, managing the administration’s legislative agenda in Washington and a technical assistance program to help community-based organizations obtain federal funds (1990 to 1994).

Executive Director of the Mayor’s Commission on the Status of Women (concurrent with the Federal Office, from 1993 to 1994).
Chief of Staff to West Side Councilmember Ruth W. Messinger– before Messinger was, herself, elected Manhattan Borough President (1979-1989).

Brewer also served on the staff of Lt. Governor Mary Anne Krupsak, the first women elected statewide in New York in 1974 (under Gov. Hugh Carey) and first served in government in the City Parks Department during the Lindsay administration.

Brewer has an MPA from Harvard’s Kennedy School of Government, and she did her undergraduate work at Columbia University and Bennington College. She co-teaches a class in urban policy each spring with former Borough President Messinger as part of Hunter College’s Public Service Scholar program, and has taught urban affairs at other area colleges, including Barnard, Baruch, Brooklyn and Queens Colleges. Brewer is married to Cal Snyder; they live on the Upper West Side. Together they have raised many foster children.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.