Biohacking: Using Insulin Load for Better Sleep and Recovery

An interesting chart popped recently popped up in the Facebook Ouraring-Users group. The graph provided by Chuck Hazzard (an Oura Ring employee) was generated using HeadsUpHealth Service. Chuck used RHR data (Resting Heart Rate) from his Oura Ring and compared it with insulin load levels from MyFitnessPal food logging. The results show how our RHR (which translates into readiness) can be influenced by carbs and protein.

In a world with year-round plentiful sugars biohackers tend to get hung up on counting carbohydrates. It is important to remember that while protein is essential it can be easily converted to sugars. Our liver is more than happy to take up to 56% of the protein we eat and convert it over to glucose. There is a simple equation we can use to calculate our “insulin load”:

Insulin Load = Carbohydrates (g) – Fiber (g) + [.56 x Protein (g)]

The above formula suggests that if we limit carbs and protein and boost fiber we could reduce our insulin load. This provides an entirely different way of looking at meals. Someone on a low carb diet might consider three eggs to be less likely to cause an insulin response than a serving of almond butter with macadamia nuts.

Let’s compare the two:

3 Hard Boiled Eggs (150g)
NetCarbs = 2.8g
Protein = 17.7g
Insulin Load = 2.8g + [.56 * 17.7]
Insulin Load = 12.7

Almond Butter (2 Tbl) + Macadamia Nuts (1oz)
NetCarbs = 4.1g
Protein = 8.8g
Insulin Load = 4.1g + [ .56 * 8.8 ]
Insulin Load = 9
As you can see the insulin load is reduced by 30%  for the almond butter and macadamia nuts option. Keep in mind that all of these are low carb friendly foods in moderation.
If one were to log their daily intake of foods and have a breakdown of carbs, fiber and protein we could easily calculate the insulin low, average and maximum levels for that person. Popular food logging apps like cronometer and MyFitnessPal are excellent tools for logging, breaking down meals into carb and protein content then exporting this data into CSV files for further scrutiny. This data is based on two months of dietary data from cronometer.  I imported the CSVs into a google sheet and ran the above insulin load equation for each day and came out with these averages:
Avg Insulin Load: 97.40
Avg Net Carbs: 42.09
The Peaks and troughs fit nicely around the averages.
Low Net Carbs: 17.67
High Net Carbs: 69.53
Min Insulin Load: 46.21
Max Insulin Load: 145.56

Comparing Insulin Load with Biometrics

The insulin load formula has the potential to help us optimize our wellbeing. Using more #quantifiedself collected data we can look for  the following metrics compared to insulin load. These charts were produced from data exported through cronometer and graphed with google sheets.

  • deep sleep
  • REM sleep
  • recovery (HRV)
  • recovery (RHR)
  • blood glucose
  • blood ketones

I’ve generated a few scatter plots below suggesting that there are “sweet spots” to hold our insulin load out for better health. These data provided is specific to me and could well be significantly different for others.

  • Deep Sleep vs Insulin Load – optimal IL range –  [ 95 – 100 ]

    • REM Sleep vs. Insulin Load – More REM is better – optimal IL range [ 90 – 120 ]

  • HRV vs Insulin Load – A Higher Heart Rate Variability is a sign of recovery – optimal IL range [ 80 – 120 ]

  • Resting Heart Rate (RHR) vs Insulin Load – A lower resting heart rate is better – optimal IL range [ 80 – 110 ]

  • Blood Glucose vs. Insulin Load – A lower blood glucose levels is better – optimal IL range [ 75 – 115 ]

  • Blood Ketone vs. Insulin Load – A higher ketone reading is better – optimal IL range [ 75 – 115 ]


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.