bubble sort @adafruit #CRICKIT & @CircuitPython animated audio animatronics

It’s a python bubble blowing robot, animated audio animatronics (video). Code here.

# CircuitPython 3.0 CRICKIT demo

from adafruit_seesaw.seesaw import Seesaw
from adafruit_seesaw.pwmout import PWMOut
from adafruit_motor import servo, motor
from busio import I2C
import random
import board
import time
import gc

i2c = I2C(board.SCL, board.SDA)
ss = Seesaw(i2c)

print("Bubble demo!")


#################### 4 Servos
servos = []
for ss_pin in (17, 16, 15, 14):
pwm = PWMOut(ss, ss_pin)
pwm.frequency = 50
_servo = servo.Servo(pwm)
_servo.angle = 90 # starting angle, middle

#################### 2 DC motors
motors = []
for ss_pin in ((18, 19), (22, 23)):
pwm0 = PWMOut(ss, ss_pin[0])
pwm1 = PWMOut(ss, ss_pin[1])
_motor = motor.DCMotor(pwm0, pwm1)

while True:
print("servo down")
servos[0].angle = 180
print("fan on")
motors[0].throttle = 1
print("fan off")
motors[0].throttle = 0
print("servo up")
servos[0].angle = 0

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org

Maker Business — Making sure the CHIPS act isn’t just crumbs

Wearables — And now a word on laser ettiquette

Electronics — Capacitor ESR

Python for Microcontrollers — Python on Microcontrollers Newsletter: CircuitPython 8.1.0 and 8.2.0-beta0 out and so much more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — JP’s Product Pick of the Week 5/30/23 USB Host Feather RP2040 @adafruit @johnedgarpark #adafruit #newproductpick

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !

1 Comment

  1. Marty McGuire

    This brings me so much joy. ?

Sorry, the comment form is closed at this time.