0

Adafruit New Products this Week: Featuring “TT” Motor to LEGO Axle! @adafruit #adafruit

Screen Shot 2018 05 04 at 7 44 26 AM 1

All the new products at Adafruit this week!


NEW PRODUCTS THIS WEEK


Code.org Circuit Playground Individual Kit Pack: Code.org CS Discoveries is a full semester’s curriculum for teaching computer science, and there’s even a hardware portion! For large classrooms and workshops, we recommend our Code.org Classroom pack. But, if you want to follow along, as a student or on your own, we now have a mini-kit – with just the essentials for a single student or share-pair. (Read more).


Love To Code: Volume 1 Add-on Booklet Kit – Microsoft MakeCode Edition: Combining coding and paper circuits has never been cuter!

Created by Jie Qi and illustrated by K-Fai Steele, Love to Code: Volume 1 – Microsoft MakeCode Edition is a full-colored, easy-to-approach book that will make everyone fall in love with coding. It’s geared towards educators and young makers who want to dive in Microsoft’s block-based language. (Read more)


DIN Rail RJ-45 To Terminal Block Adapter – Vertical Jack: This one going out to all the makers and designers who use DIN railing in their builds. This adapter plate was recommended by a customer, its perfect for simplifying complex wiring. You connect an RJ45 cable (a.k.a Ethernet) to this very PCB which can be DIN rail-mounted. Then, all 8 wires are broken out into terminal blocks, so you can connect and power your sensors, displays, microcontrollers, etc. (Read more)


DIN Rail RJ-45 To Terminal Block Adapter – Right Angle Jack: This one going out to all the makers and designers who use DIN railing in their builds. This adapter plate was recommended by a customer, its perfect for simplifying complex wiring. You connect an RJ45 cable (a.k.a Ethernet) to this very PCB which can be DIN rail-mounted. Then, all 8 wires are broken out into terminal blocks, so you can connect and power your sensors, displays, microcontrollers, etc. (Read more)


Purple Aluminum Chassis for TT Motors – 2WD: This royal undercarriage is made for the most noble, born in the purple robots! This Aluminum Chassis in Blinka purple makes for an excellent robot body. It’s a single piece of bent 2mm thick aluminum, with a variety of holes, slots and cutouts for mounting boards, sensors, and servos. The sides are notched to fit two DC Gear ‘TT’ motors perfectly – you’ll want to get four M3 or 4-40 screws in about 24mm/1.0″ to mount the motors. In the front you can screw on a ball caster. You can build a very sturdy (and quite handsome!) little robot rover with this metal frame. (Read more)


DC Gearbox “TT” Motor to LEGO and Compatible Cross Axle: Who doesn’t love LEGO and compatible bricks? Nobody! Except when we accidentally step on them. There are soooo many mechanical things one can make with those ubiquitous bricks, plates, gears, pulleys. Say a 13-meter high LEGO London Tower Bridge…(Read more)


New Products 5/30/2018 Featuring “TT” Motor to LEGO Axle!


Stay in the loop at Adafruit.com/new!

Adafruit welcome newsletter footer

Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter


Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.

Join 7,500+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython in 2018 – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Electronics manufacturing is a burger of complexity

Wearables — Battery wash cycle

Electronics — How to make your own magnetic field probe!

Biohacking — The State of DNA Analysis in Three Mindmaps

Python for Microcontrollers — Getting Started with Adafruit Circuit Playground Express

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.