Biohacking : Cryosauna Applications

Cryotherapy or “cold therapy” refers to a broad category of treatments that includes everything from ice packs to whole body chambers that utilize evaporated liquid nitrogen. In this post we will take a closer look at one of the more popular treatments which is the cryosauna. The cryosauna is considered a partial body cryotherapy as the head is not inside the chamber. Both frostbite and gas asphyxiation are risks. The most common applications are recovery from athletics, back pain, depression and weight loss. There are a few small clinical studies that suggest that cold treatments can help with all of these scenarios. The typical treatment lasts for only three minutes. Skin temperature drops down to 33.8F (1C) during that time. The cost of a single session is normally ~$50.

Mood

Multiple studies suggest that cryotherapy has powerful mood enhancing effects. One study followed 55 subjects through 10 sessions of whole body cryotherapy (WBCT) and noticed improvements in mood and a feeling of well-being. These feelings ultimately lead to an improvement in their quality of life. The more depressed or upset the patient is the stronger the effect of the therapy. Another study that looked at depressive and anxiety orders found a 50% decrease in both anxiety and depression after three weeks of whole body cryotherapy.

Weight loss

A weight loss study published in 2018 targeted adipose tissue and made use of DXA scans to track progress. After six cryotherapy treatments the average fat mass was reduced by 3.8%. There were no adverse effects or inflammation from these treatments. Two groups were used composing a total of only 25 participants.

Athletic Recovery

The old fashioned way to recover from a difficult workout is to apply an ice-pack. In an attempt to determine the effectiveness of whole body cryotherapy researchers had different athletes sprinting and running longer endurance distances to create exercise induced inflammation. The participants subjective data about pain, soreness and stress were all dramatically improved from the WBCT treatment. However, it is difficult to justify the expense of form of cooling over less expensive ice packs and cold water immersion.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.