We can’t stop imagining a version of this project for kitchen uses! From Igor Fonseca Albuquerque on Hackster.io:
In this project I designed a smart bathroom scale, using some 3D printing, an ESP8266, IFTTT and Adafruit.IO. You can use this tutorial to practice several skills: 3d printing and laser cutting skills, soldering, electronics, programming, etc.On the next steps I’ll show you how I 3D printed it, wired the circuits, and made the code. In the end of this tutorial you’ll be ready to measure your weight and log it online!
Here at Adafruit, we sell all of these amazing components, but we couldn’t find a good way to interact with them over the internet. There are certainly a lot of great services out there for datalogging, or communicating with your microcontroller over the web, but these services are either too complicated to get started, or they aren’t particularly fun to use. So, we decided to experiment with our own system, and that is how Adafruit IO got started.
To make it easy for people to get started using Arduino or ESP8266 we have starter packs with just about everything you may want to connect to the internet, with known-working WiFi modules! ESP8266 Huzzah Kit CC3000 Huzzah Kit
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Python for Microcontrollers — Python snakes its way on the SparkFun SAMD21 Mini, Hackaday.io, 10k thanks, and Tim’s magazine #Python #Adafruit #CircuitPython @circuitpython @micropython @ThePSF @Adafruit
Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !
I find it fascinating about 3D models and their current designs. It is great that in these corners of the web we can meet to learn more about advances in devices and more advanced software. It would be great to know more about this type of project. The world of 3D is infinite and wonderful. Here I leave to lovers of 3D modeling of my website https://www.stlfinder.com/ where you can find an infinity of designs and download them