Biohacking : Optimizing the Warm Up

A proper warm up before going for a run sounds like a good idea. How long should the warm up be and at what effort level? We want to warm up our muscles and increase our range of motion without compromising our performance. Many studies have looked into different aspects of the warm up and recorded various physiological responses, but few studies have focused on achieving optimal performance. We will take a closer look at two studies that came to roughly the same conclusion about the structure of an optimal warm up for peak performance.
Both studies found the sweet spot for a warm up was ~15 minutes at 60% effort would lead to optimal performance. Deviating from this and warming up significantly by moving at a slower  pace showed no advantages. Attempting to warm up at faster at more than a 70% effort caused a 9-16% drop performance. The 1998 study “The effect of warm-up intensity on range of motion and anaerobic performance” found a 6% boost in aerobic performance and a 7% increase in anaerobic performance.
The unfortunate participants in these studies were on a treadmill with a rectal thermocouple in place to measure their core temperature. Skin temperature was also monitored. The muscles were found to rapidly increase to temperature during warm up within 5-10 minute they were at their ideal operating temperature. The core body temperature was slower to rise taking over 30 minutes. Several studies have looked into tested stetching and passive forms of warming up (hot baths, saunas and heating pads). The most effective form of warm up seems to be a lower effort version for the activity your are about to embark on. Runners would start with a fast walk and move into a jog over 15 minutes.
Studies:
  1. (1998) The effect of warm-up intensity on range of motion and anaerobic performance – https://www.jospt.org/doi/pdf/10.2519/jospt.1998.27.2.154
  2. (2003) – Warm Up II – Performance Changes Following Active Warm Up and How to Structure the Warm Up –https://www.researchgate.net/publication/10746532_Warm_up_II_-_Performance_changes_following_active_warm_up_and_how_to_structure_the_warm_up

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.