Raspberry Pi 3 B+ with Bitscope Micro and 7″ touch screen. Features a USB port in the front for a mouse, ethernet in the back or you can use the built in wireless in the Raspberry Pi 3 B+. Hook up 5 volts from the power supply to the USB MicroB Plug Breakout to power the Raspberry Pi. Hook up the Fan to the 12 volt side of the power supply. I had to make make a extension cable for the Bitscope Micro and Hammer for it to fit in the case but was not that had to make.
Each Friday is PiDay here at Adafruit! Be sure to check out our posts, tutorials and new Raspberry Pi related products. Adafruit has the largest and best selection of Raspberry Pi accessories and all the code & tutorials to get you up and running in no time!
Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.