Adafruit Holiday Shipping Deadlines 2018: Attention! Please place all UPS 2 Day orders by Friday 12/14/2018 11 AM EST
0

New Products 8/22/2018 Featuring Adafruit #RGB #Matrix #FeatherWing Kit! @adafruit #adafruit

IScreen Shot 2018 05 04 at 7 44 26 AM 1

Browse through all that’s new here!


NEW PRODUCTS THIS WEEK


3889 01

Silicone Cover Stranded-Core Ribbon Cable – 4 Wires 1 Meter Long – 30 AWG Black: For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon cables! These may look a lot like squid ink noodles, but they’re not. The silicone-sheathed wire is super-flexible and soft, and it’s also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Read more.


3890 01

Silicone Cover Stranded-Core Ribbon Cable – 10 Wire 1 Meter Long – 28AWG Black: For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon cables! These may look a lot like squid ink noodles, but they’re not. The silicone-sheathed wire is super-flexible and soft, and it’s also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Read more.


3891 01

Silicone Cover Stranded-Core Ribbon Cable – 4 Wires 1 Meter Long – 28AWG Black: You get 1 meter of 4 x black wires, so you can pull and separate how many wires you need. The wire is 28AWG stranded with an outer diameter of 1.2mm. Read more.


3892 01

Silicone Cover Stranded-Core Ribbon Cable – 4 Wires 1 Meter Long – 26AWG Black: You get 1 meter of 4 x black wires, so you can pull and separate how many wires you need. The wire is 26AWG stranded with an outer diameter of 1.5mm. Read more.


3894 03

JST PH 3-Pin to Female Socket Cable – 200mm: This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1″ female header sockets on the end. We’re carrying these to match up with our Hallowing, for extending and connecting sensors or LEDs – and the wires are even color coded! Read more.


3893 03

JST PH 3-Pin to Male Header Cable – 200mm: This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1″ male header plugs on the end. We’re carrying these to match up with our Hallowing, for extending and connecting sensors or LEDs – and the wires are even color coded! Read more.


3919 01

Adafruit NeoPixel LED Strip with 3-pin JST Connector – 60 LED/meter / 0.5 Meter: Plug in and glow, his Adafruit NeoPixel LED Strip with JST PH Connector has 30 total LEDs in a “60 LED per meter” spacing, and is 0.5 meters long, in classy Adafruit Black. Its not too long, but has lots of glowing action. Perfect for use with a Hallowing, or a custom design with a JST PH socket. Read more.


3815 03

LEGO compatible Brick Bracket for DC Gearbox “TT” Motor: Who doesn’t love LEGO and compatible bricks? Nobody! Except when we accidentally step on them. There are soooo many mechanical things one can make with those ubiquitous bricks, plates, gears, pulleys. Say a 13-meter high LEGO London Tower Bridge…Read more.


3880 01

Eccentric Hub for TT Motors: We really enjoy our DC gear motors (a.k.a “TT Motor”) but unless you have a 3D printer it can be a challenge to get something attached to the axle. That’s why we’ve got this Eccentric TT Motor Hub – it gives you 2 x hexagonal holes and two circle holes. It’s a very good solution to quickly and easily mount custom wheels, cardboard & wood, or other mechanisms to your robot project. Read more.


3872 00

5V Electromagnet – 2.5Kg Holding Force – P20/15: Ever wanted to feel like Magneto? Well, now you sort-of can! Bring the ferromagnetic objects in the world under your control with an Electromagnet

The simplest way to make an electromagnet is to get a solenoid, pass some current through it, and then get a piece of soft iron inside the solenoid. When the current is switched off, the electromagnet is no longer, well, magnetic! Read more.


3926 03

Adafruit HTU21D-F Temperature & Humidity Sensor Breakout Board – with or without Headers: It’s summer and you’re sweating and your hair’s all frizzy and all you really want to know is why the weatherman said this morning that today’s relative humidity would max out at a perfectly reasonable 52% when it feels more like 77%. Enter the HTU21D-F Temperature + Humidity Sensor – the best way to prove the weatherman wrong! Read more.


3871 02

Mini Geared Pager Motor with Return Spring: These are very unusual motors, but we thought they could be handy for projects that need a small geared-down motor. At the core is a ‘pager motor’ – a small thin DC motor that runs on about 3VDC. That motor is then geared down inside the red-plastic body of the motor. Finally, the output axle is connected to a plastic triangle that has a bent-wire return spring. There are two plastic stops built into the outside of the motor. Read more.


3515 00

Adafruit HTU21D-F Temperature & Humidity Sensor Breakout Board – Fully Assembled: It’s summer and you’re sweating and your hair’s all frizzy and all you really want to know is why the weatherman said this morning that today’s relative humidity would max out at a perfectly reasonable 52% when it feels more like 77%. Enter the HTU21D-F Temperature + Humidity Sensor – the best way to prove the weatherman wrong! Read more.


3036 04

Adafruit RGB Matrix Featherwing Kit – For M0 and M4 Feathers: hoy! It’s time to create a dazzling light up project with our new RGB Matrix FeatherWing. Now you can quickly and easily create projects featuring your favorite 16 or 32-pixel tall matrix boards. Using our RGB Matrix library is easy and works wonderfully with any of our M0 or M4 based Feathers.

Please note: This wing is only tested/designed to work with the SAMD21 M0 and SAMD51 M4 Feathers. It’s not for use with any other Feathers at this time. (That said, if you’d like to add support, we’d be happy to take a pull request on the library repo. Read more.


New Products 8/22/2018 Featuring Adafruit #RGB #Matrix #FeatherWing Kit!


Stay in the loop at Adafruit.com/New!

Adafruit welcome newsletter footer 1

Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 9,200+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Japanese word working and more in December’s issue of HackSpace magazine!

Wearables — Solder-less magic

Electronics — = != ==.

Biohacking — Finding Bliss with Anandamide

Python for Microcontrollers — sysfs is dead! long live libgpiod! libgpiod for linux & Python running hardware @circuitpython @micropython @ThePSF #Python @Adafruit #Adafruit

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.